ARA

 

  GÜNCEL HABERLER

01/05/2010 :
Web Sitemiz Yayına başladı..

01/05/2010 :
05-08 Mayıs 2010 ISK-SODEX İstanbul Fuar Merkezi / Yeşilköy/ Salon 6-7 Stand G24' deyiz.

01/05/2010 :
Bizden haber almaya devam edin...
E-Bülten
Adınız
Soyadınız
E-Posta
Üye Olmak İstiyorum
Üyelikten Çıkmak İstiyorum

 

KURUCU ÜYESİ

 

 

  

Yapısı

FURANFLEX® BACA ASTARININ YAPISI

FuranFlex® baca astarı 3 ayrı tabakadan oluşur:
İÇ TABAKA: Termoplastik hortum
KOMPOZİT TABAKA: Isıya dayanıklı reçine ile dolgunlaştırılmış cam elyaf
DIŞ TABAKA: Sentetik yünlü iplikle örülmüş ince kumaş
FuranFlex® 3 katmanlıdır 

İç Tabaka

İç tabaka, kurulumun kolaylığını sağlar. 100 - 150 mikron kalınlıkta, termoplastik karışımlardan elde edilen alaşımla yapılmış, plastik hortumdur. 110 °C'de yumuşayarak, bacanın istenen ebat ve şeklini almasına yardımcı olur.
Available in all sizes between 60-850 mm

Orta Tabaka

The intermediate composite layer is the heat, flame and corrosion resistant structural material of the FuranFlex® chimney liner tube.
Composite means resin of high solidity reinforced with thin glass fibres. The resin surrounds and embeds the glass fibres, cementing
them to each other. The resin transfers forces from one glass fibre to another and protects the glass fibres from corrosion. The solidity
of composite materials is determined by the amount, type and direction of the thinner-than-hair reinforcing fibres. One square metre
of the 2 mm thick wall structure of the FuranFlex liner tube contains 3,000,000 metres of glass fibre.

The diameter of the reinforcing glass fibres in FuranFlex® is 13 microns, which are used in the form of fabric. The rigidity of glass fibres is the same as that of steel, but they are three times lighter (7,8 g/cm3 and 2,4 g/cm3).

The resin developed for the FuranFlex® liner tube is a liquid material consisting of a mixture of several components. Our resin is a material that cannot be found in nature, it was developed by human hands and knowledge. It appears in three forms:

  
   
Match-stick, a hair, glass fibre   Glass texitle   Impregnated glass textile


  • LIQUID STATE:
    Its viscosity is similar to that of honey. When it is cold it becomes more viscous, when it is warm it is more fluid.

  • SOFT, NOT LIQUID "B" STATE:
    When heated and/or in reaction to a catalytic agent, it changes from the liquid state into a state that is no longer liquid. It can be held in the hand and bent. It can be stored in this state for a certain amount of time. When exposed to heat it becomes slightly softer for a short period.

  • HARDENED STATE:
    When exposed to heat or when stored for a long time, resin irrevocably hardens. Once it has hardened, it cannot be softened again. At this point it is a solid structural material with excellent heat and corrosion resistance properties. Its mechanical properties are weak.

  
 
Liquid state   "B" state


External layer

The external layer is a thin fabric woven from synthetic fibre. Its function is to protect the composite layer and to ensure the exact perimeter of the chimney tube. Its other function is to form a homogenous external surface.
The brand name "Kompozitor-FuranFlex®" is printed on it, as is a metre scale indicating the length of FuranFlex used.
Hardened Furanflex® tubes